The mechanical properties of Al-TiC metal matrix composites fabricated by a flux-casting technique
Φόρτωση...
Ημερομηνία
Συγγραφείς
Karantzalis, A. E.
Wyatt, S.
Kennedy, A. R.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Elsevier
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
Metal matrix composites have been made by the addition of 10 mu m diameter TiC particles to molten aluminium by a proprietary process. The resultant reinforcement distribution in commercial purity Al and 2xxx alloy matrices is reasonably homogeneous and extensive grain refinement is observed. The elastic modulus increases per volume percent of reinforcement added, are greater for Al-TiC composites than they are for commercial Al-Al2O3 and Al-SiC, powder or liquid-route manufactured composites. The high modulus increases, for a reinforcement with a relatively low modulus compared to SiC and Al2O3 and close agreement with Tsai-Halpin stiffness-model predictions, are attributed to efficient load transfer in this system due to strong interfacial bonding encouraged by the nucleation of solid Al on the TiC particle surfaces. (C) 1997 Elsevier Science S.A.
Περιγραφή
Λέξεις-κλειδιά
al-tic, metal matrix composites, techniques, grain-refinement, interfacial phenomena, aluminum, microstructure, fracture, carbon
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
<Go to ISI>://A1997YB71100010
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών