Partially amorphous stainless steel coatings: Microstructure, annealing behavior and statistical optimization of spray parameters
Φόρτωση...
Ημερομηνία
Συγγραφείς
Zois, D.
Lekatou, A.
Vardavoulias, M.
Vaimakis, T.
Karantzalis, A. E.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Elsevier
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Surface & Coatings Technology
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
A stainless steel powder of a mixed amorphous and crystalline structure was HVOF sprayed in an effort to produce coatings with a large glass fraction. In the first part of this work, the microstructure and annealing behavior of powder and coatings are studied. The coatings consisted of a glassy part and a martensitic part, the latter with boride, borosilicide and boro-carbide dispersions. The annealing behavior of powder and coatings is characterized by glass crystallization and martensite tempering. Annealing of the powder leads to complete microcrystallization of the glassy part, whereas annealing of the coatings eventually leads to nanocrystallization of the residual glass phase. In the second part, the effects of selected spraying parameters (oxygen-to-fuel ratio, powder feed rate, spraying distance and spraying stages) on characteristic coating properties are investigated by means of the Taguchi analysis. The oxygen-to-fuel ratio mostly affected the coating hardness and porosity. The powder feed rate had a significant effect on all the coating properties but mostly on the deposition rate and crack extension force. Spraying in stages significantly increased the deposition rate, whereas it promoted coating amorphicity. A spraying experiment under the optimum conditions determined by the Taguchi analysis, showed a good fit between the predicted and the attained property values. (C) 2011 Elsevier B.V. All rights reserved.
Περιγραφή
Λέξεις-κλειδιά
hvof, stainless steels, metallic glass, dsc, xrd, taguchi analysis, bulk metallic glasses, thermal barrier coatings, mechanical-properties, corrosion-resistance, residual-stresses, forming ability, gas-atomization, alloy coatings, b alloys, velocity
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
<Go to ISI>://000297825600059
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών