On the structure of an asymmetric carbon membrane with a novolac resin precursor
Φόρτωση...
Ημερομηνία
Συγγραφείς
Steriotis, T.
Beltsios, K.
Mitropoulos, A. C.
Kanellopoulos, N.
Tennison, S.
Wiedenman, A.
Keiderling, U.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
John Wiley & Sons
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Journal of Applied Polymer Science
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
An asymmetric tubular carbon membrane, appropriate for gas separation applications, was made through carbonization at 800 degrees C of a precursor structure containing two phenol-formaldehyde resins, a partially cured novolac resin in 30-60 mu m grains (bulk material), and a resole resin (membrane, skin material). A replica of the skin material was deposited separately on a stainless steel substrate. The samples were analyzed by nitrogen adsorption, small-angle neutron scattering, and scanning electron microscopy (SEM). The basic structural entities of both skin and the bulk part were low-aspect-ratio carbon domains with a characteristic dimension in the 4.0-4.5 nm range. Further, the materials were characterized by microporosity in the 0.30-0.50 range with isotropic pores having a 1.3 nm diameter. The results are discussed with the help of a systematic survey of possible carbon structures with an intermediate level of microporosity. (C) 1997 John Wiley & Sons, Inc.
Περιγραφή
Λέξεις-κλειδιά
novolac resin, carbon membranes, carbon microstructure, micropores, nitrogen adsorption, small-angle neutron scattering (sans), adsorption, packing, spheres, glass
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
<Go to ISI>://A1997WZ61200008
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών