Effect Of Processing And Loading Conditions Upon The Fatigue Behavior of a Cf/Epoxy Laminate
Φόρτωση...
Ημερομηνία
Συγγραφείς
Dassios, K.
Koimtzoglou, C.
Galiotis, C.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Advanced Composites Letters
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
The current work reports oil the tensile and fatigue behaviour of an autoclave-cured unidirectional carbon fibre reinforced epoxy-matrix laminate. The macromechanical properties of the composite are established under interrupted and uninterrupted, static and dynamic conditions at a maximum strain below the critical fatigue limit of the matrix material. The established S-N curve was used to calculate the endurance fatigue limit of the laminate as well as to record ail increase in fatigue life of specimens tested at load levels lower than two standard deviations below the mean static strength of the material. The failure modes exhibited by the composite under all testing conditions were recorded and interpreted by means of the damage mechanisms that originate them. The results of interrupted testing showed that the combined effect of fatigue and residence at high stress levels For prolonged periods of time - conditions that simulate a realistic loading scheme- trigger premature fibre failure and thus specimen failure.
Περιγραφή
Λέξεις-κλειδιά
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών