Effect of Destabilization Heat Treatments on the Microstructure of High-Chromium Cast Iron: A Microscopy Examination Approach
Φόρτωση...
Ημερομηνία
Συγγραφείς
Karantzalis, A. E.
Lekatou, A.
Diavati, E.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Springer
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Journal of Materials Engineering and Performance
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
A 18.22 wt.% Cr white iron has been subjected to various destabilization heat treatments. Destabilization at 800 A degrees C caused gradual precipitation of M(23)C(6) secondary carbide particles with time leading to a gradual increase in the bulk hardness. At 900, 1000, and 1100 A degrees C, an initial sharp increase in bulk hardness with time occurred, reaching a plateau that was followed by a slightly decreasing trend. The combination of martensite formed, stoichiometry, and morphology of the secondary carbides present (mostly M(7)C(3)) are responsible for the obtained values of hardness. At 1100 A degrees C, severe dissolution of the secondary carbides and consequent stabilization of the austenitic phase took place. Maximum hardness values were obtained for destabilization at 1000 A degrees C. The correlation between bulk hardness and microstructural features was elaborated.
Περιγραφή
Λέξεις-κλειδιά
cast iron, destabilization treatment, high chromium, secondary carbides, white iron, abrasion resistance, secondary carbides, precipitation
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
<Go to ISI>://000271027100012
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών