Reinforcing of Biologically Derived Apatite with Commercial Inert Glass
Φόρτωση...
Ημερομηνία
Συγγραφείς
Gunduz, O.
Ahmad, Z.
Ekren, N.
Agathopoulos, S.
Salman, S.
Oktar, F. N.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Sage Pub.
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Journal of Thermoplastic Composite Materials
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
Apatite-based ceramics, derived from fine powder of calcinated bovine-bone (BHA), were successfully reinforced with 5 and 10 wt% commercial inert glass (CIG), which contained biocompatible elements, via sintering at different temperatures between 1000 and 1300 degrees C. The products were subjected to mechanical testing and microstructural and crystallographic analyses. Comparison of the experimental results with those from earlier similar studies shows that CIG is superior for reinforcing of BHA ceramics compared with other bioactive glasses. Provided that the CIG addition does not exceed a certain limit, optimally being approximately 5 wt%, the resultant BHA-CIG materials can exhibit high strength after sintering and remarkable resistance toward over-firing at 1300 degrees C. The influence of the amount of CIG on the developed microstructure and crystalline structure after sintering at different temperatures is discussed.
Περιγραφή
Λέξεις-κλειδιά
apatite, inert glass, cullet, sintering, mechanical properties, microstructure, bovine hydroxyapatite bha, alumina composite coatings, mechanical-properties, bone, enamel
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
<Go to ISI>://000268336600004
http://jtc.sagepub.com/content/22/4/407.full.pdf
http://jtc.sagepub.com/content/22/4/407.full.pdf
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών