Unification of fibre/matrix interfacial measurements with Raman microscopy
Φόρτωση...
Ημερομηνία
Συγγραφείς
Galiotis, C.
Paipetis, A.
Marston, C.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
John Wiley & Sons, Ltd
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Journal of Raman Spectroscopy
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
The effect of specimen geometry upon the parameters that govern the stress transfer (transfer length, interfacial shear strength, positively affected length and stress concentration-factor) in a carbon fibre/epoxy composite was examined in detail. Five frequently employed composite geometries were considered: single fibre composite coupons incorporating discontinuous and continuous carbon fibres, multi-fibre composite tapes with a controlled inter-fibre separation, four-ply unidirectional coupons, and, finally, impregnated fibre rows. The chemistry and the curing characteristics of the matrix were kept unaltered regardless of specimen geometry. All fibre stress measurements were conducted by means of Raman microscopy, The experimental results showed that the transfer length, positively affected length (PAL) and the interfacial shear stress obtained at the location of a fibre fracture are not considerably affected by specimen geometry. In contrast, the residual fibre stress of the unloaded specimens and the stress concentration factors obtained in fibres adjacent to a fibre fracture site were found to be significantly dependent upon fibre volume fraction and specimen geometry. Copyright (C) 1999 John Wiley & Sons, Ltd.
Περιγραφή
Λέξεις-κλειδιά
stress transfer efficiency, 2-dimensional composites, fiber, spectroscopy, strength
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
<Go to ISI>://000083469400007
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών