Bovine Hydroxyapatite (BHA) Strontium Oxide Composites
Φόρτωση...
Ημερομηνία
Συγγραφείς
Gunduz O., Ozyegin L. S., Dorozhkin S., Eruslu N., Kayali S., Agathopoulos S., Oktar F. N.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Trans Tech Publications
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Key Engineering Materials
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
Composites of calcinated bovine bone derived hydroxyapatite (HA) with 5 and 10 wt % SrCO3 were prepared by sintering. The production of HA from natural sources is preferred due to money and time saving reasons. In this study scanning electron microscopy (SEM) investigations and together with measurements of microhardness, density, and compression strength were performed. The experimental results indicated that compression strength and microhardness values of HA-Sr-oxide composites decrease when the content of SrCO3 and sintering temperature increase. The best compression strength values were achieved after sintering at 1000°C. It was seen that at higher temperatures the compression strength and the microhardness values decrease due to the pore formation. The pore formation is very important for scaffold formation for tissue engineering purposes.
Περιγραφή
Λέξεις-κλειδιά
Hydroxyapatite (HA), Mechanical Properties, Microstructure, Sintering, Strontium Oxide
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
http://www.scientific.net/KEM.396-398.407
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών