Pulsed laser deposition of La2/3Ca1/3MnO3 films at low oxygen pressures
Φόρτωση...
Ημερομηνία
Συγγραφείς
Panagiotopoulos, I.
Kallias, G.
Pissas, M.
Psycharis, V.
Niarchos, D.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Elsevier
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Materials Science and Engineering B-Solid State Materials for Advanced Technology
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
Films deposited by pulsed laser ablation from La2/3Ca1/3MnO3 targets exhibit a large variety of properties depending on the exact preparation conditions. The as-deposited films at high enough oxygen pressures P-O2, have transition temperatures (T-c) close to that of the target material (265 K). At lower P-O2 the films can be made to have lower T-c's but as P-O2 is decreased below a certain value, an insulating behavior in all the temperature range is observed. X-ray diffraction pole-figure measurements of these insulating films indicate an extremely strained structure. By post annealing in oxygen these films are recrystallised and a T-c of 265 K is restored. However the highest magnetoresistance value of (rho(0)- rho(H))/rho (H)= 109000%, at H= 50 kOe, was obtained for a film having a transition temperature of 135 K. (C) 1998 Elsevier Science S.A. All rights reserved.
Περιγραφή
Λέξεις-κλειδιά
pulsed laser deposition, la2/3ca1/3mno3 films, low oxygen pressure, giant magnetoresistance, temperature, dependence
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
<Go to ISI>://000074726100005
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών