Composites of bovine hydroxyapatite (BHA) and ZnO
Φόρτωση...
Ημερομηνία
Συγγραφείς
Gunduz, O.
Erkan, E. M.
Daglilar, S.
Salman, S.
Agathopoulos, S.
Oktar, F. N.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Springer
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Journal of Materials Science
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
Composites of calcinated bovine bone-derived hydroxyapatite (BHA), doped with 2.5, 5, and 10 wt.% ZnO were produced by sintering. Scanning electron microscopy (SEM) and X-ray diffraction analysis together with measurements of density, compressive strength, and Vickers microhardness were carried out in the sintered samples. The experimental results showed that the best mechanical properties were achieved in the samples with 5% addition of ZnO. The highest value of compression strength was achieved after sintering at 1200 degrees C (72 MPa) and of microhardness at 1300 degrees C (548 HV). Prolong heat treatment at 1300 degrees C results in vulnerable BHA-ZnO composites to over-firing effect.
Περιγραφή
Λέξεις-κλειδιά
mechanical-properties, sintering temperature, glass-ceramics, zinc release, bone, coatings, apatite, enamel
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
<Go to ISI>://000254249900003
http://www.springerlink.com/content/25763r8032187rn3/fulltext.pdf
http://www.springerlink.com/content/25763r8032187rn3/fulltext.pdf
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών