Damage modelling and simulation of composite materials using ultrasonic measurements
Φόρτωση...
Ημερομηνία
Συγγραφείς
Paipetis, A.
Pappas, Y. Z.
Vlachos, D. E.
Kostopoulos, V.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Adcotec Ltd
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Advanced Composites Letters
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
The monitoring of the elastic properties of Al2O3/Al2O3 composites during the exposure at high temperature environment that simulates the working conditions of a gas turbine has been performed non-destructively using ultrasonics. The applied methodology is based on velocity measurements of the elastic waves that propagate in an orthotropic medium. These were estimated experimentally using a custom pulser-receiver setup which allows control of the angle of the incident pulse on the sample, while the latter is immersed in a water bath. The derivation of the elastic constants in order to reproduce the stiffness matrix of the composite is an inverse wave propagation problem described by the Christoffel equation. The damage initiation and propagation as depicted by the deterioration of the moduli of the material was described using deterministic and stochastic approaches. Finally, the damage accumulation process was simulated as a Markov process.
Περιγραφή
Λέξεις-κλειδιά
technology, behavior
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
<Go to ISI>://000231466000001
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών