Bovine Hydroxyapatite (BHA) Boron Oxide Composites
Φόρτωση...
Ημερομηνία
Συγγραφείς
Gunduz O., Ozyegin L. S., Dorozhkin S., Eruslu N., Kayali S., Agathopoulos S., Oktar F. N.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Trans Tech Publications
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Key Engineering Materials
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
Composites of calcinated bovine bone derived hydroxyapatite (HA) with 5, 7.5 and 10 wt % B2O3 were prepared by sintering. The production of HA from natural sources is preferred due to economical and time saving reasons. In this study scanning electron microscopy (SEM) investigations, microhardness and compression strength measurements were performed on composites. The experimental results indicated that compression strength and microhardness of HA-boron-oxide composites decrease when the content of boric acid and sintering temperature increase. The best mechanical properties achieved for 5 wt % addition of dehydrated boric acid. It was seen that at higher sintering temperatures, the compression strength and the microhardness decrease due to the very intensive pore formation. The results agree fairly well with microstructure analysis.
Περιγραφή
Λέξεις-κλειδιά
Boric Acid, Hydroxyapatite (HA), Mechanical Properties, Microstructure, Sintering
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
http://www.scientific.net/KEM.396-398.403
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών