Pelletizing Sintering, Prereduction, and Smelting of Greek Chromite Ores and Concentrates
Φόρτωση...
Ημερομηνία
Συγγραφείς
Vazarlis, H. G.
Lekatou, A.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Inst. Materials
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Ironmaking & Steelmaking
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
A study on the pelletising-sintering, prereduction, and smelting of (mainly) Greek chromites is presented. The compressive strength of fired chromite pellets was shown to be affected negatively by an increase of the content of the gangue of chromite and affected positively by increases of the proportion of fines in the pelletising mix up to 75%-74 mum, of the content of the dust recovered from industrial production of high carbon ferrochromium, and of the pellet diameter. Very satisfactory degrees of prereduction of Greek chromites were attained, which were strongly dependent on parameters such as temperature, time, variations of carbon addition, particle size of reactants, chromite composition, and type of carbonaceous reducing agent. A preliminary kinetic study suggests that the diffusion of carbon through the reduction products is the rate limiting step of the prereduction of Greek chromites. Satisfactory high carbon ferrochromium was produced by smelting Greek chromites, using coke of Greek lignite as reductant.
Περιγραφή
Λέξεις-κλειδιά
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
<Go to ISI>://A1993KT30800006
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών