Effects of boron substitution on the structural and magnetic properties of melt-spun Sm(Co,Fe,Zr)(7.5) and Sm(Co,Fe,Zr,Cu)(7.5) magnets
Φόρτωση...
Ημερομηνία
Συγγραφείς
Makridis, S. S.
Litsardakis, G.
Panagiotopoulos, I.
Niarchos, D.
Hadjipanayis, G. C.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
American Institute of Physics
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Journal of Applied Physics
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
In this work we examine the effect of small boron substitution (x=0, 0.005, 0.010, 0.015) on the structural and magnetic properties of Sm(Co0.86-xFe0.1Zr0.04Bx)(7.5) and Sm(Co0.74-xFe0.1Cu0.12Zr0.04Bx)(7.5) melt-spun samples, as a function of wheel speed and annealing conditions. Boron substituted as-spun ribbons are found to have increased coercivity, Hc>5 kOe, and small grain size of 60-100 nm. For copper containing samples, the highest coercivity (Hc=16.3 kOe) was obtained in as-spun ribbons with x=0.015. In samples without copper the coercivity increased after short annealing (Hc=12 kOe for x=0.015). The large coercivities are attributed to a fine microstructure consisting mainly of hexagonal TbCu7-type phase and a small amount of soft-phase grains. (C) 2002 American Institute of Physics.
Περιγραφή
Λέξεις-κλειδιά
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
<Go to ISI>://000175576400025
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών