Microstructural and surface characterization of Ti-6Al-4V alloys after fretting fatigue
Φόρτωση...
Ημερομηνία
Συγγραφείς
Nicolaou, P. D.
Shell, E. B.
Matikas, T. E.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Elsevier
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
Ti-6Al-4V alloy specimens were tested under conditions of fretting fatigue, with the contact geometry, the normal stress, as well as the cyclic stress selected such that the mixed, slip-stick regime prevails during the experiments. Following testing, the specimens were characterized using white light interference profilometry, scanning electron microscopy, microhardness, and electron dispersive spectroscopy (EDS). The results revealed that the surface roughness of the dip region increases compared to the roughness of the stick, and non-contact ones. In addition, at the higher spatial frequencies, the power spectral density (PSD) of the slip region increases compared to the PSD of the stick and non-contact regions, thus revealing that an increase of the population of the smaller size asperities occurs. The microstructure of the material below the slip zone was found to be transformed to a finer one; and the percentage of the transformed beta phase has been decreased substantially. This area of the transformed microstructure, has also a higher hardness compared to the hardness of the bulk structure. EDS analysis revealed a high concentration of oxygen on the specimen's surface at the slip region of the two contacting bodies. This finding indicates that elevated temperatures are developed during fretting fatigue and enable the diffusion of oxygen from the atmosphere to the alloy. (C) 1999 Elsevier Science S.A. All rights reserved.
Περιγραφή
Λέξεις-κλειδιά
fretting fatigue, ti-6al-4v, profilometry, fretting zones, titanium-alloys, wear
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
<Go to ISI>://000082276900012
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών