Fibrous hydroxyapatite carbon nanotube composites by chemical vapor deposition: In situ fabrication, structural and morphological characterization
Φόρτωση...
Ημερομηνία
Συγγραφείς
Kosma, V.,
Tsoufis, Th.,
Koliou, Th.,
Kazantzis, A.,
Beltsios, K.,
Hosson, J. De,
Gournis, D.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Elsevier
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Materials Science and Engineering: B
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
Fibrous hydroxyapatite (HA) carbon nanotube composites were synthesized by the catalytic decomposition of acetylene over Fe Co bimetallic catalysts supported on the fibrous HA. Two forms of fibrous HA (distinct needle-like monocrystals and spherulitic aggregates of needles) were synthesized using a simple precipitation method and loaded with bimetallic catalysts (from 2 up to 20 wt%) by a wet chemical impregnation method. The HA supported catalysts were evaluated for the in situ growth of carbon nanotubes using the catalytic chemical vapor deposition method. The effect of reaction temperature and metal loading on the yield, structural perfection and morphology of the carbon products were investigated using a combination of X-ray diffraction, thermal analysis, Raman spectroscopy and scanning and transmission electron microscopies. The results revealed that both the selection of the growing conditions and the metal loading determine the yield and overall quality of the synthesized carbon nanotubes, which exhibit high graphitization degree when synthesized in high yields.
Περιγραφή
Λέξεις-κλειδιά
Carbon nanotube, Hydroxyapatite, Bimetallic catalysts, CVD, SEM
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
http://www.sciencedirect.com/science/article/pii/S0921510713000548
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών