Μελέτη γραφιτικής ενίσχυσης ιεραρχικών σύνθετων υλικών με μήτρα εποξειδικής ρητίνης
Φόρτωση...
Ημερομηνία
Συγγραφείς
Τσίρκα, Κυριακή
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Πανεπιστήμιο Ιωαννίνων. Πολυτεχνική Σχολή. Τμήμα Μηχανικών Επιστήμης Υλικών
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
Οι ιεραρχικές γραφιτικές ενισχύσεις αποτελούν μια πολλά υποσχόμενη προσέγγιση στον κλάδο τον προηγμένων σύνθετων υλικών καθώς παρέχουν τη δυνατότητα της πλήρους εκμετάλλευσης των ιδιοτήτων των νανο-υλικών. Η τροποποίηση των επιφανειών των ινών άνθρακα με νανο-δομές, ακολουθώντας μια βιομιμητική προσέγγιση, μπορεί να οδηγήσει στη βελτίωση της δομικής ακεραιότητας καθώς και στην εμφάνιση ή ενίσχυση διαφόρων λειτουργικοτήτων στα τελικά σύνθετα υλικά. Πιο συγκεκριμένα, μια αρχιτεκτονική δομή που προσελκύει αυξανόμενο ερευνητικό ενδιαφέρον είναι οι ιεραρχικές ίνες άνθρακα, δηλαδή ίνες επικαλυμμένες με νανοσωλήνες άνθρακα (ΝΣΑ). Αυτή η δομή προσδίδει πολλαπλά πλεονεκτήματα όπως διαστρωματική ενίσχυση σε ινοπλισμένα σύνθετα υλικά, αυξημένη ηλεκτρική και θερμική αγωγιμότητα καθώς και λειτουργικότητες όπως η ανίχνευση της παραμόρφωσης από το ίδιο το σύνθετο. Δύο από τις πιο γνωστές μεθόδους παρασκευής των ιεραρχικών ενισχύσεων είναι η τεχνική της χημικής εναπόθεσης ατμών και η εναπόθεση ΝΣΑ στην επιφάνεια των ινών άνθρακα μέσω υγρών χημικών τροποποιήσεων. Ωστόσο, έως σήμερα δεν έχει παρουσιαστεί μια εύκολα επεκτάσιμη και συμφέρουσα λύση παρασκευής ιεραρχικών ενισχύσεων.
Η παρούσα διδακτορική διατριβή επιδιώκει την κατανόηση των αλληλεπιδράσεων των ΝΣΑ με τις ίνες άνθρακα και την εποξειδική μήτρα και στην εφαρμογή αυτής της γνώσης για το σχεδιασμό μιας απλής διαδικασίας παρασκευής ιεραρχικών ενισχύσεων με βελτιωμένες μηχανικές ιδιότητες και πολυλειτουργικότητες. Η εργασία ανέπτυξε και βελτιστοποίησε μια απλή μέθοδο χημικής τροποποίησης των επιφανειών των ινών και των ΝΣΑ και εμβάπτισης η οποία επιτρέπει τον έλεγχο του πάχους του στρώματος επικάλυψης. Οι ιεραρχικές ενισχύσεις που παράχθηκαν μέσω των δύο παραπάνω μεθόδων μελετήθηκαν ως προς τη μορφολογία, τις φυσικοχημικές και μηχανικές ιδιότητες τους καθώς και την λειτουργικότητα της ανίχνευσης της παραμόρφωσης μέσω της τεχνικής Raman. Έπειτα οι ιεραρχικές ενισχύσεις ενσωματώθηκαν σε εποξειδικές μήτρες και μελετήθηκαν οι διεπιφανειακές ιδιότητες καθώς και οι παραμένουσες τάσεις στις διεπιφάνειες των μοντέλων συνθέτων υλικών. Στο τελικό στάδιο, παρασκευάστηκαν πολυστρωματικά ινοπλισμένα ιεραρχικά σύνθετα υλικά τα οποία αξιολογήθηκαν ως προς τη διαστρωματική αντοχή και τις ηλεκτρικές τους ιδιότητες.
Hierarchical graphitic reinforcements are one of the most promising approaches towards the exploitation of the full capabilities of nanomaterials in advanced Carbon Fiber Reinforced Composites (CFRCs). Nano-engineering of the Carbon Fiber (CF) surfaces, following a biomimetic approach, can lead to the improvement of the structural integrity, as well as impart additional functionalities to the final composites. The structural hierarchy which is ubiquitous in natural systems, such as wood or bones, accounts for some combinations of characteristics which are uncommon in human-made materials, i.e. high stiffness and high strength. A nano-designed architecture of growing interest is the Carbon Nanotube (CNT) “coated” CF, which can entail numerous positive effects including through-thickness and interply matrix reinforcement of CFRCs, while simultaneously enabling or enhancing additional multifunctional characteristics such as electrical and thermal conductivity and strain sensing. Within this context, two of the most widely used approaches for the production of hierarchical reinforcements for CFRPs are the growth of CNTs on CFs by Chemical Vapor Deposition (CVD) techniques and the deposition of CNTs on CFs by wet chemical modifications of their surfaces. However, an easily scalable, economical process has not been presented hitherto. This thesis aimed at developing an understanding of the interactions of the CNTs with the CFs and the epoxy matrix and to the implementation of this knowledge in order to design and optimise a simple process for the preparation of hierarchical reinforcements with enhanced mechanical and multifunctional properties. A dip coating process, which relied on the wet chemical modification of the surfaces of the CFs and the CNTs, was designed and optimised. This process is promising for use on various applications since it allows for the control of the thickness of the resulting coating by CNTs. The morphology, physicochemical and mechanical properties and Raman strain sensitivity of the hierarchical reinforcements produced by both these methods were investigated. Then, the hierarchical reinforcements were embedded in epoxy matrices, and the interfacial properties of model composites, as well as the residual thermal stresses, were also evaluated. Finally, laminated composites were produced, and their interlaminar properties, as well as their electrical response, were studied.
Hierarchical graphitic reinforcements are one of the most promising approaches towards the exploitation of the full capabilities of nanomaterials in advanced Carbon Fiber Reinforced Composites (CFRCs). Nano-engineering of the Carbon Fiber (CF) surfaces, following a biomimetic approach, can lead to the improvement of the structural integrity, as well as impart additional functionalities to the final composites. The structural hierarchy which is ubiquitous in natural systems, such as wood or bones, accounts for some combinations of characteristics which are uncommon in human-made materials, i.e. high stiffness and high strength. A nano-designed architecture of growing interest is the Carbon Nanotube (CNT) “coated” CF, which can entail numerous positive effects including through-thickness and interply matrix reinforcement of CFRCs, while simultaneously enabling or enhancing additional multifunctional characteristics such as electrical and thermal conductivity and strain sensing. Within this context, two of the most widely used approaches for the production of hierarchical reinforcements for CFRPs are the growth of CNTs on CFs by Chemical Vapor Deposition (CVD) techniques and the deposition of CNTs on CFs by wet chemical modifications of their surfaces. However, an easily scalable, economical process has not been presented hitherto. This thesis aimed at developing an understanding of the interactions of the CNTs with the CFs and the epoxy matrix and to the implementation of this knowledge in order to design and optimise a simple process for the preparation of hierarchical reinforcements with enhanced mechanical and multifunctional properties. A dip coating process, which relied on the wet chemical modification of the surfaces of the CFs and the CNTs, was designed and optimised. This process is promising for use on various applications since it allows for the control of the thickness of the resulting coating by CNTs. The morphology, physicochemical and mechanical properties and Raman strain sensitivity of the hierarchical reinforcements produced by both these methods were investigated. Then, the hierarchical reinforcements were embedded in epoxy matrices, and the interfacial properties of model composites, as well as the residual thermal stresses, were also evaluated. Finally, laminated composites were produced, and their interlaminar properties, as well as their electrical response, were studied.
Περιγραφή
Λέξεις-κλειδιά
Ιεραρχικά σύνθετα υλικά, Ίνες άνθρακα, Νανοσωλήνες άνθρακα, Ιεραρχικές διεπιφάνειες, Hierarchical carbon fibre reinforced composites, Carbon fibres, Carbon nanotubes, Hierarchical Interfaces/Interphases
Θεματική κατηγορία
Carbon fibers
Παραπομπή
Σύνδεσμος
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Πανεπιστήμιο Ιωαννίνων. Πολυτεχνική Σχολή. Τμήμα Μηχανικών Επιστήμης Υλικών
Όνομα επιβλέποντος
Παϊπέτης, Αλκιβιάδης
Εξεταστική επιτροπή
Παϊπέτης, Αλκιβιάδης
Γουρνής, Δημήτριος
Παπανικολάου, Γεώργιος
Καρακασίδης, Μιχαήλ
Μπέλτσιος, Κωνσταντίνος
Παπακωνσταντίνου, Παγώνα
Μπάρκουλα, Νεκταρία-Μαριάνθη
Γουρνής, Δημήτριος
Παπανικολάου, Γεώργιος
Καρακασίδης, Μιχαήλ
Μπέλτσιος, Κωνσταντίνος
Παπακωνσταντίνου, Παγώνα
Μπάρκουλα, Νεκταρία-Μαριάνθη
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Πολυτεχνική Σχολή. Τμήμα Μηχανικών Επιστήμης Υλικών
Πίνακας περιεχομένων
Χορηγός
Βιβλιογραφική αναφορά
Βιβλιογραφία: σ. 213-238
Ονόματα συντελεστών
Αριθμός σελίδων
248 σ.