Nanostructure and bimodal structure of Si3N4 ceramics developed by spark plasma sintering method
Φόρτωση...
Ημερομηνία
Συγγραφείς
Fu, R. L.
Agathopoulos, S.
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
Maney Publishing
Περίληψη
Τύπος
Είδος δημοσίευσης σε συνέδριο
Είδος περιοδικού
peer reviewed
Είδος εκπαιδευτικού υλικού
Όνομα συνεδρίου
Όνομα περιοδικού
Advances in Applied Ceramics
Όνομα βιβλίου
Σειρά βιβλίου
Έκδοση βιβλίου
Συμπληρωματικός/δευτερεύων τίτλος
Περιγραφή
The densification of high energy ball milled Si3N4 nanopowders through spark plasma sintering was investigated. Nanoceramics of Si3N4, with fine microstructure, comprising of grains with a diameter of similar to 70 nm, were produced after sintering at 1600 degrees C for 5 min in N-2 atmosphere with a fast heating rate of 300 K min(-1). The size and the aspect ratio of Si3N4 grains increased with decreasing heating rate and increasing holding time and temperature. Post-annealing of sintered ceramics at 1850 degrees C for 3 h favoured development of a self-reinforced bimodal microstructure containing large elongated grains.
Περιγραφή
Λέξεις-κλειδιά
si3n4, microstructure, mechanical properties, grain size, sintering, nanoceramics, silicon-nitride ceramics, abnormal grain-growth, hot-pressed si3n4, microstructure, energy, fabrication, composite, strength, sialon
Θεματική κατηγορία
Παραπομπή
Σύνδεσμος
<Go to ISI>://000268849000006
Γλώσσα
en
Εκδίδον τμήμα/τομέας
Όνομα επιβλέποντος
Εξεταστική επιτροπή
Γενική Περιγραφή / Σχόλια
Ίδρυμα και Σχολή/Τμήμα του υποβάλλοντος
Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών